2
Share:
CAREL GLD Small Gas Leakage Detector
Intelligent fixed refrigerant gas leakage detection for cold rooms, freezer rooms and commercial or industrial refrigeration systems. Available for selected HFC, HFO, hydrocarbon, R744 CO₂ and R717 ammonia refrigerants.
Continuous Refrigerant Leak Detection for Safer Refrigeration
The CAREL GLD Small Refrigerant Gas Leakage Detector is a fixed gas monitoring device designed to detect refrigerant leakage in environments containing commercial and industrial refrigeration equipment.
The detector continuously monitors the surrounding atmosphere and provides warning or alarm signals when the configured gas concentration thresholds are exceeded.
Featuring LED diagnostics, configurable alarm relays, analogue outputs, RS485 Modbus communication and Bluetooth connectivity through the CAREL RILEVA TE app, GLD Small can operate independently or integrate with compatible CAREL and third-party monitoring systems.
.png)
Key Features & Benefits
Continuous Gas Monitoring
Designed for fixed installation where refrigerant gas leakage could occur.
Early Warning & Alarms
Separate configurable warning and alarm thresholds with visual status indication and relay outputs.
IP67 Enclosure
Protected detector design for suitable refrigeration environments, subject to correct installation.
Bluetooth Configuration
CAREL RILEVA TE app supports configuration, monitoring and service functions.
Flexible System Integration
RS485 Modbus RTU, configurable analogue signal and relay outputs for compatible supervisory systems.
Replaceable Sensing Element
Pre-calibrated replacement sensor modules are available according to the detected refrigerant family.
Select by Refrigerant & Sensor Technology
Different sensing technologies are used depending on the refrigerant that needs to be detected.
Semiconductor
For specified refrigerant blends, HFC/HFO and hydrocarbon refrigerant groups.
Examples: R32, R134a, R404A, R290Infrared
Dedicated infrared sensing technology for refrigerant carbon dioxide monitoring.
R744 / CO₂Electrochemical
Dedicated electrochemical sensing element for ammonia refrigerant leakage detection.
R717 / NH₃CAREL GLD Small Part Numbers
Expand the built-in or remote-sensor category to view the manufacturer-listed model codes.
GDSB Series – Built-in Sensor Models
| Part Number | Detection Type |
|---|---|
| GDSBI20C00 | R744 CO₂ – Infrared |
| GDSBE19C00 | R717 Ammonia – Electrochemical |
| GDSBSMXC00 | Group 1 – Semiconductor |
| GDSBSHFC00 | Group 2 – Semiconductor |
| GDSBSHCC00 | Group 3 – Semiconductor |
GDSR Series – Remote Sensor Models
| Part Number | Detection Type |
|---|---|
| GDSRI20C00 | R744 CO₂ – Infrared |
| GDSRE19C00 | R717 Ammonia – Electrochemical |
| GDSRSMXC00 | Group 1 – Semiconductor |
| GDSRSHFC00 | Group 2 – Semiconductor |
| GDSRSHCC00 | Group 3 – Semiconductor |
Simple LED Status Identification
Normal operation
Warning threshold exceeded
Alarm threshold exceeded
A flashing green LED indicates warm-up. For complete diagnostic indications, refer to the CAREL manual.
Sensor Maintenance & Replacement
CAREL supplies pre-calibrated replacement sensor elements for the GLD Small product range, helping simplify service and sensor replacement.
View Replacement Sensor Part Numbers
| Part Number | Sensor Type |
|---|---|
| GDOPZI2010SP | R744 CO₂ infrared sensor |
| GDOPZE1910SP | R717 ammonia electrochemical sensor |
| GDOPZSMX10SP | Group 1 semiconductor sensor |
| GDOPZSHF10SP | Group 2 semiconductor sensor |
| GDOPZSHC10SP | Group 3 semiconductor sensor |
Typical sensor checks: semiconductor and electrochemical versions require periodic checks; infrared versions have different calibration requirements. Follow the specific manual and applicable regulations.
CAREL RILEVA TE App
The CAREL RILEVA TE mobile application allows authorised personnel to interact with the GLD Small detector for supported configuration, parameter adjustment, diagnostics and service procedures.
Typical Applications
Important Product Selection Information
Confirm the exact refrigerant, sensing technology, detector part number, gas concentration range and warning/alarm thresholds before ordering. A GLD Small detector must be selected, installed, configured and maintained according to the CAREL documentation and applicable safety regulations.
These GLD Small models are not ATEX-certified for hazardous classified locations. Semiconductor sensors may also respond to interfering gases or substances.
Detect Refrigerant Leaks. Protect Your Refrigeration System.
Looking for CAREL GLD Small refrigerant gas leakage detectors in Malaysia? Contact RNA Engineering & Trading Sdn Bhd for enquiries, product availability and assistance selecting a suitable gas detection solution for your cold room or refrigeration system.
Inquiry - CAREL Refrigerant Gas Leakage Detector
