Eliwell Digital Thermostat

IC 901

IC 901 controllers have one point of intervention only and can be used both for heating and cooling applications. These controllers also have an input for the PTC thermostatic probe (the NTC input can be selected with a parameter) and a relay output for management of the load. The values measured by the probes are displayed with two digits and sign. All models have TTL connections that enable the controllers to be used with Copy Card, the quick programming accessory.

IC 902

IC 902 controllers have one point of intervention only and can be used both for heating and cooling applications. These controllers also have an input for the PTC thermostatic probe (the NTC input can be selected with a parameter) and a relay output for management of the load. The values measured by the probes are displayed with three and a half digits and sign. All models have TTL connections that enable the controllers to be used with Copy Card, the quick programming accessory.

ID 974

The ID 974controllers are devices suitable for applications on normal or low temperature refrigerating units. They are provided with two PTC thermostatic probe inputs (NTC can be selected by parameter) and two relay outputs for compressor and defrost management. The defrosting cycle may be stopped at a specified time or, using the appropriate probe placed on the evaporator, when the end cycle temperature has been reached. The value of the probe’s reading is viewed on a display by three digits and a minus sign; the decimal point reading can be set by parameter. All the versions are provided with a TTL connection in order to use Copy Card, the quick programming accessory. In addition, the 16 A compressor relay options and the buzzer are provided. These controllers are available in the 32×74 standard format and the power supply voltage is, on choice, 230 Va or 12 Va/c.