Steam Coil

Steam coil is normally use in air heating application. It is design for transferring high temperature to the air passing through it. The steam temperature normally supplies from boiler to steam coil is more than 100°C. It is important to ensure a steam coil installed in a smooth loop system where leaving steam or condensate steam drain out from the system fast. Else pressure will build up in the steam coil and hence to cause leakage of the steam coil. That is why a steam coil does not apply in a close-loop system. Condensate steam that leave steam coil must be drained out smooth and fast.

Provides high-efficiency and good quality finned coil, which made of copper tube mechanically bonded to aluminum or copper fins. We are committed to the design, manufacture and supply of world competitive products and services that provide the best customer value for both local and export markets.  Thermal-Matic aims to become an absolutely reliable custom made coil manufacturer, providing total solution to your requirement and needs in Air-Conditioning, Refrigeration line, Marine, Offshore coil, Bus/Truck, Commercial/Industrial condensers, evaporators and etc.


Fins are fabricated from either Aluminium or Copper with extruded collars to maximize heat transfer and ensure accurate fin spacing. Fin surfaces are available in corrugated, sine wave or enhanced with enhanced with edges that are straight or rippled. Special chemical coating for marine enhance application is available upon request. Spacing available from 3 FPI to 20 FPI (Fin Per Inch).

Seamless drawn copper tubes are available in 3/8″Ø, 1/2″Ø & 5/8″Ø. Grooved tubes are available on request.

Standard casing with galvanized steel.  For better resistance to prevent corrosive is by using Stainless Steel – 304 (2B) or 316L (2B) on request.

Header is fabricated from copper, galvanized steel and schedule 40 (Steam Pipe).

All coils are 100% leak tested under water using high pressure dry air 350-400 PSIG.